Feature:Net Weight: 16KG Inflating Speed: 2800R/Min Noise: MAX 78DB Cooling System: Water Cooling Compression Stage: Two Stage Lubrication Mode: Splash Type Test Inflating Result: It takes 3 mins 50 seconds to fill full 0.45L tank to 30MPA Test Inflating Result:It takes 8 mins to fill full 1L tank to 300BARHigh-pressure oil-water separator, fiber cotton fine filtration, separation of particles ismore than 0.01 micron suspension,cleanliness up to 99.998%, fiber cotton saturationcan be judged by working time, cumulative work 50 minutes to replace,please follow the operating instructions.The cyclone separator is divided into four parts:1. The cyclone, the compressed air passes through the cyclone and rotates at a high speed.Under the inertia centrifugal force,the oil particles and the condenser water particles will smashto the outer wall, and hit the inner wall of the separator casing andthen flow down the wall. discharge2.Manual drain valve, draining the oil-water mixture after each inflation3. Brass sintered filter element, which can filter impurities particles directly above 5 microns4. Safety valve, control the gas pressure in the low pressure part, prevent the high pressurecomponent of the machine frommalfunctioning, causing the high pressure collective returnand damage the low pressure partHydraulic pumps are widely used in stackers, small and medium-sized lifting platforms, material handling, and RV leveling. It is compatible with many dump trailers and movers.
